Janome 200140009 | Bias Binder Sewing Foot | Category A

The bias binder foot is used to apply pre-folded bias binding to the edge of fabric in one easy step.

It is equipped with a small funnel to fold and guide the binding over the fabric edge before it reaches the needle and can be used with either zig-zag or decorative stitches as well as straight stitch.

10mm - 14mm bias tape can be used.

(TAKE THE BIND OUT OF THIS TRICKY TECHNIQUE!)

How to use the Binder foot:

1. Cut the end of the tape diagonally and insert it into the binder foot.
2. Push out the end of the tape towards the needle hole of the foot with a needle or a stiletto.
3. Insert the edge of the cloth into the opening of the guide.
4. Sew slowly, guiding the edge of the cloth with your middle finger rest and, while guiding the binding tape through the conical tape guide correctly with your right hand.
   
   

For Janome Front Loaders Category A :- 216S, 217S, 219S, 415, 419S, 423S, 1550 , 1560, 1571, 1580, 1585, 1780, 2015, 2039, 2041, 2050, 2070, 2139, 2200XT, 3816, 3822, ENX24, ES14N, HC1200, J1012, J1024, J3-18, J3-20, J3-24, PS1024, PS1030, RX18S, Simplicity, XR23, DE1800, DM1000, DM1118, DM1018, DM1108, DMX200, DMX300, LX180, DEX20, DEX25, JL110, JL220